centos7固定IP地址
文章目录
centos7固定IP地址
- centos7的网络IP地址配置文件
/etc/sysconfig/network-scripts
- 先查看当前网卡名称 ifconfig
[root@localhost]# ifconfig
docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255
inet6 fe80::42:dff:fe04:70eb prefixlen 64 scopeid 0x20<link>
ether 02:42:0d:04:70:eb txqueuelen 0 (Ethernet)
RX packets 667 bytes 1606039 (1.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 997 bytes 272465 (266.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.229.175 netmask 255.255.0.0 broadcast 192.168.255.255
inet6 fe80::e6f1:a244:8e00:5639 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:1f:1d:a2 txqueuelen 1000 (Ethernet)
RX packets 1806 bytes 356013 (347.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2057 bytes 2644609 (2.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
veth3af3ed4: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::a4d2:2ff:fe1a:e6cd prefixlen 64 scopeid 0x20<link>
ether a6:d2:02:1a:e6:cd txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 23 bytes 1873 (1.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
veth5705b61: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::30c3:96ff:fe3c:5a0f prefixlen 64 scopeid 0x20<link>
ether 32:c3:96:3c:5a:0f txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 25 bytes 2133 (2.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vethb48dd9e: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::8493:b0ff:fe99:3410 prefixlen 64 scopeid 0x20<link>
ether 86:93:b0:99:34:10 txqueuelen 0 (Ethernet)
RX packets 667 bytes 1615377 (1.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 997 bytes 272252 (265.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:04:9d:27 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- ens33网卡对应的配置文件为ifcfg-ens33,使用vim编辑如下
[root@localhost]# vim ifcfg-ens33
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="static" # 使用静态IP地址,默认为dhcp
IPADDR="192.168.241.100" # 设置的静态IP地址
NETMASK="255.255.255.0" # 子网掩码
GATEWAY="192.168.241.2" # 网关地址
DNS1="192.168.241.2" # DNS服务器
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
UUID="95b614cd-79b0-4755-b08d-99f1cca7271b"
DEVICE="ens33"
ONBOOT="yes" #是否开机启用
- 重启network服务实现置静态IP地址
[root@localhost]# service network restart
[root@localhost]# systemctl restart newwork.service
-
其他辅助
- 查看本机网关
[root@localhost]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 184.82.152.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 184.82.152.97 0.0.0.0 UG 0 0 0 eth0[root@localhost]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 184.82.152.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 184.82.152.97 0.0.0.0 UG 0 0 0 eth0- 查看DNS
[root@localhost]# cat /etc/resolv.conf- 配置hostname
[root@localhost]# hostnamectl set-hostname mini1

评论
登录后参与技术讨论,分享你的经验与见解。
登录 / 注册暂无评论