FFMPEG学习

参考雷神的代码:

/**
* 最简单的SDL2播放音频的例子(SDL2播放PCM)
* Simplest Audio Play SDL2 (SDL2 play PCM)
*
* 本程序使用SDL2播放PCM音频采样数据。SDL实际上是对底层绘图
* API(Direct3D,OpenGL)的封装,使用起来明显简单于直接调用底层
* API。
*
* 函数调用步骤如下:
*
* [初始化]
* SDL_Init(): 初始化SDL。
* SDL_OpenAudio(): 根据参数(存储于SDL_AudioSpec)打开音频设备。
* SDL_PauseAudio(): 播放音频数据。
*
* [循环播放数据]
* SDL_Delay(): 延时等待播放完成。
*
* This software plays PCM raw audio data using SDL2.
* SDL is a wrapper of low-level API (DirectSound).
* Use SDL is much easier than directly call these low-level API.
*
* The process is shown as follows:
*
* [Init]
* SDL_Init(): Init SDL.
* SDL_OpenAudio(): Opens the audio device with the desired
*                  parameters (In SDL_AudioSpec).
* SDL_PauseAudio(): Play Audio.
*
* [Loop to play data]
* SDL_Delay(): Wait for completetion of playback.
*/

#include <stdio.h>
#include <tchar.h>

extern "C"
{
#include "SDL.h"
};

Uint32  audio_len;//音频数据大小
Uint8  *audio_pos;//指向音频数据的指针


/**回调函数(由系统调用)
*  函数声明:typedef void (SDLCALL * SDL_AudioCallback) 
*            (void *userdata, Uint8 * stream, int len);
*  This function is called when the audio device needs more data.
*
*  userdata: An application-specific parameter saved in the SDL_AudioSpec structure(SDL_AudioSpec结构中的用户自定义数据,一般情况下可以不用)
*  stream:   A pointer to the audio data buffer.(该指针指向需要填充的音频缓冲区)
*  len:      The length of that buffer in bytes.(音频缓冲区的大小,以字节为单位)
*
*  Once the callback returns, the buffer will no longer be valid.
*  Stereo samples are stored in a LRLRLR ordering.
*
*  You can choose to avoid callbacks and use SDL_QueueAudio() instead, if
*  you like. Just open your audio device with a NULL callback.
*/

void  fill_audio(void *userdata, Uint8 *stream, int len)
{
    //SDL2中必须首先使用SDL_memset()将stream中的数据设置为0
    SDL_memset(stream, 0, len);
    if (audio_len == 0)        /*  Only  play  if  we  have  data  left  */
    {
        return;
    }
    len = (len > audio_len ? audio_len : len);    /*  Mix  as  much  data  as  possible  */

    /**
    *  函数声明:extern DECLSPEC void SDLCALL 
    *  SDL_MixAudio(Uint8 * dst, const Uint8 * src, Uint32 len, int volume);
    *  This takes two audio buffers of the playing audio format and mixes
    *  them, performing addition, volume adjustment, and overflow clipping.
    *  The volume ranges from 0 - 128, and should be set to ::SDL_MIX_MAXVOLUME
    *  for full audio volume.  Note this does not change hardware volume.
    *  This is provided for convenience -- you can mix your own audio data.
    *
    *  #define SDL_MIX_MAXVOLUME 128
    */

    SDL_MixAudio(stream, audio_pos, len, SDL_MIX_MAXVOLUME);
    audio_pos += len;
    audio_len -= len;
}

int main(int argc, char* argv[])
{
    //初始化SDL
    if (SDL_Init(SDL_INIT_AUDIO))
    {
        printf("Could not initialize SDL - %s\n", SDL_GetError());
        return -1;
    }

    //SDL_AudioSpec初始化
    SDL_AudioSpec wanted_spec;
    wanted_spec.freq = 44100;            //音频数据的采样率(常用的有48000,44100等)
    wanted_spec.format = AUDIO_S16SYS;//音频数据的格式
    wanted_spec.channels = 2;            //声道数(例如单声道取值为1,立体声取值为2)
    wanted_spec.silence = 0;            //设置静音的值
    wanted_spec.samples = 1024;        //音频缓冲区中的采样个数(要求必须是2的n次方)
    wanted_spec.callback = fill_audio;//填充音频缓冲区的回调函数

    //打开音频
    if (SDL_OpenAudio(&wanted_spec, NULL) < 0)
    {
        printf("can't open audio.\n");
        return -1;
    }

    FILE *fp_pcm = fopen("..\\FFmpeg_PCM\\output.pcm", "rb");
    if (fp_pcm == NULL)
    {
        printf("cannot open this file\n");
        return -1;
    }

    int pcm_buffer_size = 4096;//每次读取4096字节的数据,同时也是音频帧大小
    char *pcm_buffer = (char *)malloc(pcm_buffer_size);
    int data_count = 0;

    //播放音频数据
    SDL_PauseAudio(0);

    while (true)
    {
        int ret = fread(pcm_buffer, 1, pcm_buffer_size, fp_pcm);
        if (ret != pcm_buffer_size)
        {
            //这里有可能是会有剩余音频数据的,不知道这样改对不对?
            audio_pos = (Uint8 *)pcm_buffer;
            audio_len = ret;
            while (audio_len > 0)
            {
                SDL_Delay(1);
            }

            //退出
            break;
            
            //循环播放
            fseek(fp_pcm, 0, SEEK_SET);
            fread(pcm_buffer, 1, pcm_buffer_size, fp_pcm);
            data_count = 0;
        }
        printf("Now Playing %10d Bytes data.\n", data_count);
        data_count += pcm_buffer_size;
        

        audio_pos = (Uint8 *)pcm_buffer;
        //Audio buffer length 
        audio_len = pcm_buffer_size;
        

        while (audio_len > 0)//Wait until finish
        {
            SDL_Delay(1);
        }
    }
    free(pcm_buffer);
    fclose(fp_pcm);
    SDL_Quit();
    return 0;
}

雷神代码中if (fread(pcm_buffer, 1, pcm_buffer_size, fp) != pcm_buffer_size){}
如果获取不到4096个字节的音频数据,就从头接着播放了,当然这意味着读到末尾了,但是剩下的音频数据没有做处理?

疑问:

wanted_spec.silence = 0; //设置静音的值
wanted_spec.samples = 1024; //音频缓冲区中的采样个数(要求必须是2的n次方)

int pcm_buffer_size = 4096;//每次读取4096字节的数据,同时也是音频帧大小

评论

暂无评论