AnyCAD(MFC版)三种格式(IGES,STEP,STL)三维零件的读取

AnyCAD(MFC版)三种格式(IGES,STEP,STL)三维零件的读取

**注:**显示请参考利用AnyCAD在MFC中对话框中增加三维显示

##零件读取代码 | 类型 | 相关类 | | - | - | | IGES | TopoDataExchangeIges | | STEP | TopoDataExchangeStep | | STL | TopoDataExchangeStl |

###IGES读取与测试

void CAnyCADTest1Dlg::OnBnClickedImportIges()
{
    // TODO: 在此添加控件通知处理程序代码
    CFileDialog igesDlg(TRUE);
    igesDlg.m_ofn.lpstrTitle = _T("读取IGES文件");
    igesDlg.m_ofn.lpstrFilter = _T("IGES(*.iges\0*.iges;*.igs\0All Files\0*.*\0\0)"); 
    if (!igesDlg.DoModal())
    {
        AfxMessageBox(_T("模型导入失败!")); 
        return;
    }
   
#ifdef UNICODE
    USES_CONVERSION;
    string path = T2A(igesDlg.GetPathName());
#else
    string path = igesDlg.GetPathName().GetBuffer(0);
#endif

    TopoDataExchangeIges iges;                //复合类型(Topo_COMPOUND),24个顶点,6个面,24条边
    m_igesShape = iges.Read(path);

//    auto node = m_Window3D.ShowGeometry(m_igesShape, ElementId(2));     //该句为显示读入模型的语句

    ///////////////////////////后面为一些测试//////////////////////////
    EnumTopoShapeType type = m_igesShape.GetShapeType();                //类型

    //对iges的face进行提取
    m_subGroup = GlobalInstance::topoExplor.ExplorFaces(m_igesShape);

    TopoShapeGroup edgeGroup = GlobalInstance::topoExplor.ExplorEdges(m_igesShape);
    EdgeClassifier edgeClassfier;
    edgeClassfier.Initialize(m_igesShape);
    TopoShapeGroup freeEdgeGroup = edgeClassfier.GetFreeEdges();
    int size = edgeGroup.Size();                                        //24
    int size1 = freeEdgeGroup.Size();                                    //23
    int size2 = edgeClassfier.GetSharedEdges().Size();                    //0
    int size3 = edgeClassfier.GetStandaloneEdges().Size();                //0
    for (int i(0); i < size; ++i)
    {
        m_Window3D.ShowGeometry(edgeGroup.GetTopoShape(i), ElementId(i+1));
    }

    m_Window3D.GetView().RequestDraw(1);
}

###STEP读取与测试

void CAnyCADTest1Dlg::OnBnClickedImportStep()
{
    // TODO: 在此添加控件通知处理程序代码
    CFileDialog stepDlg(TRUE);
    stepDlg.m_ofn.lpstrTitle = _T("读取STEP文件");
    stepDlg.m_ofn.lpstrFilter = _T("STEP(*.step\0*.step\0All Files\0*.*\0\0)");
    if (!stepDlg.DoModal())
    {
        AfxMessageBox(_T("模型导入失败!"));
        return;
    }

#ifdef UNICODE
    USES_CONVERSION;
    string path = T2A(stepDlg.GetPathName());
#else
    string path = stepDlg.GetPathName().GetBuffer(0);
#endif

    TopoDataExchangeStep step;        //实体(Topo_SOLID ),8个顶点,6个面,12条边
    m_stepShape = step.Read(path);

//    auto node = m_Window3D.ShowGeometry(m_stpShape, ElementId(2));      //该句为显示读入模型的语句

///////////////////////////后面为一些测试//////////////////////////
    EnumTopoShapeType type = m_stepShape.GetShapeType();        //类型

    //对step的face进行提取
    m_subGroup = GlobalInstance::topoExplor.ExplorFaces(m_stepShape);

    TopoShapeGroup edgeGroup = GlobalInstance::topoExplor.ExplorEdges(m_stepShape);
    EdgeClassifier edgeClassfier;
    edgeClassfier.Initialize(m_stepShape);
    TopoShapeGroup sharedEdgeGroup = edgeClassfier.GetSharedEdges();
    int size = edgeGroup.Size();                                //12
    int size1 = edgeClassfier.GetFreeEdges().Size();            //0
    int size2 = sharedEdgeGroup.Size();                            //11
    int size3 = edgeClassfier.GetStandaloneEdges().Size();        //0
    for (int i(0); i < size2; ++i)
    {
        m_Window3D.ShowGeometry(sharedEdgeGroup.GetTopoShape(i), ElementId(i + 1));
    }
    
    m_Window3D.GetView().RequestDraw(1);
}

###STL读取与测试

void CAnyCADTest1Dlg::OnBnClickedImportStl()
{
    // TODO: 在此添加控件通知处理程序代码
    CFileDialog stlDlg(TRUE);
    stlDlg.m_ofn.lpstrTitle = _T("读取STL文件");
    stlDlg.m_ofn.lpstrFilter = _T("STL(*.stl\0*.stl\0All Files\0*.*\0\0)");
    if (!stlDlg.DoModal())
    {
        AfxMessageBox(_T("模型导入失败!"));
        return;
    }

#ifdef UNICODE
    USES_CONVERSION;
    string path = T2A(stlDlg.GetPathName());
#else
    string path = stlDlg.GetPathName().GetBuffer(0);
#endif

    TopoDataExchangeStl stl;        //三角面片(Topo_SHELL),8个顶点,12个面(三角面),18条边
    m_stlShape = stl.Read(path);

    //    auto node = m_Window3D.ShowGeometry(m_stpShape, ElementId(2));     //该句为显示读入模型的语句
    
    ///////////////////////////后面为一些测试//////////////////////////
    EnumTopoShapeType type = m_stlShape.GetShapeType();         //类型

    //对stl的face进行提取
    m_subGroup = GlobalInstance::topoExplor.ExplorFaces(m_stlShape);

    TopoShapeGroup edgeGroup = GlobalInstance::topoExplor.ExplorEdges(m_stlShape);
    EdgeClassifier edgeClassfier;
    edgeClassfier.Initialize(m_stlShape);
    TopoShapeGroup freeEdgeGroup = edgeClassfier.GetFreeEdges();
    int size = edgeGroup.Size();                            //18
    int size1 = freeEdgeGroup.Size();                        //0
    int size2 = edgeClassfier.GetSharedEdges().Size();        //17
    int size3 = edgeClassfier.GetStandaloneEdges().Size();    //0
    for (int i(0); i < size; ++i)
    {
        m_Window3D.ShowGeometry(edgeGroup.GetTopoShape(i), ElementId(i + 1));
    }

    m_Window3D.GetView().RequestDraw(1);
}

###测试分析   以上程序读取的均为长方体快,为同一长方体块的三种文件。   以上程序中在读取完三种零件后对读取零件的一些属性进行了测试,主要包含以下属性:     (1) type:读取得到的零件的类型;     (2) 边数:包括两种 ——            a)通过GlobalInstance::topoExplor.ExplorEdges获取的物体所有边界,个数为size;            b)通过edgeClassfier.GetFreeEdges获取的物体边界,其中又包括三种边界free edge,shared edge,standalone edge,对应的个数为size1,size2,size3。      测试代码结果如下表所示(表格中后两列是后期补充的实验,测试模型顶点个数及面个数):

零件名称

size

size1

size2

size3

type

顶点个数

面个数

IGES

24

23

0

0

Topo_COMPOUND

24

6

STEP

12

0

11

0

Topo_SOLID

8

6

STL

18

0

17

0

Topo_SHELL

8

12

  从表中可以看出,     (1) 通过edgeClassfier.GetFreeEdges获取的边界个数(size1+size2+size3)总比通过GlobalInstance::topoExplor.ExplorEdges获取的边界个数(size)少1,通过绘制结果可以看出少的是GlobalInstance::topoExplor.ExplorEdges获取的最后一个边界。     (2) IGES获取的零件类型为复合类型,边界个数与顶点个数均为24,相当于每个面单独统计一次边界和顶点,导致测得的长方体边界数为实际的两倍,顶点个数为实际的三倍;     (3) STEP获取的零件类型为实体类型,边界个数与顶点个数均与实际长方体边界个数和顶点个数相同;     (4) STL获取的零件类型为面片类型,且为三角面片。而长方体表面为四边形,因此存储为STL模型时自动对长方体表面进行划分,每个面添加了一条边界从而将四边形转化为三角形面片,因此得到的面个数为12,边界个数为18。通过图像也可以看出(如下图)。

评论

暂无评论