list
一、list要注意事项
1.迭代器失效
list没有增容销毁空间这一说,因此insert等插入不会导致失效 erase也是返回下一个位置的迭代器
if (*it % 2 == 0)
it = l.erase(it); //erase 会导致迭代器失效
//空间被erase后不能再进行操作,即++,*;
else
++it;
2.splic(连接两个链表)
list<int> l;
l.push_back(1);
l.push_back(2);
l.push_back(3);
l.push_back(4);
list<int> lt;
lt.push_back(10);
lt.push_back(20);
lt.push_back(30);
lt.push_back(40);
list<int>::iterator pos = l.begin();
++pos;
l.splice(pos, lt); //在 l 链表中的pos位置插入lt链表
Print_list(l); //1 10 20 30 40 2 3 4
Print_list(lt); //lt插入过去就没了,成了l的一部分
二、模拟实现list
namespace 9TSe
{
template<class T> //一个节点的类
struct __list_node
{
T _data;
__list_node* _next;
__list_node* _prev;
__list_node(const T& x = T())
:_data(x)
,_next(nullptr)
,_prev(nullptr)
{}
};
template<class T, class Ref, class Ptr> //迭代器的类
struct __list_iterator
{
typedef __list_node<T> Node;
typedef __list_iterator<T, Ref, Ptr> Self;
Node* _node; //创建一个新节点
__list_iterator(Node* node) //构造节点
:_node(node)
{}
Ref operator*() //应该还有一个const类型的此函数,但要再写一个就要再创建一个const_iterator类其他都赋值,这两个加个const
{ //会导致代码冗余 T&
return _node->_data;
}
Ptr operator->() //同上,套用模板可以简写 T*
{
return &(_node->_data); //&取其地址以->,所以实际上使用应为 dit->->_year,只不过被编译器特殊处理优化
}
Self& operator++() //前置++,做到能像vector一样++就访问下一个数据
{
_node = _node->_next;
return *this;
}
Self& operator++(int) //后置++
{
//__list_iterator tmp(*this);
Self tmp = *this;
//_node = _node->_next;
++(*this);
return tmp;
}
Self& operator--() //前置--
{
_node = _node->_prev;
return *this;
}
Self& operator--(int) //后置--
{
Self tmp(*this);
//_node = _node->_prev;
--(*this);
return *this;
}
bool operator!=(const Self& it) //迭代器循环时需要!= 记得加上const
{
return _node != it._node; //迭代器(两个指针)不相同
}
bool operator==(const Self& it)
{
return _node == it._node;
}
};
template<class T> //链表的类
class list
{
public:
typedef __list_node<T> Node;
typedef __list_iterator<T,T&,T*> iterator;
typedef __list_iterator<T,const T&, const T*> const_iterator;
iterator begin()
{
return iterator(_head->_next); //哨兵的下一位才是数据的第一位
}
iterator end()
{
return iterator(_head); //哨兵就是最后一位
}
const_iterator begin()const
{
return const_iterator(_head->_next);
}
const_iterator end()const
{
return const_iterator(_head);
}
list()
{
_head = new Node;
_head->_next = _head;
_head->_prev = _head;
}
list(const list<T>& lt)
{
_head = new Node;
_head->_next = _head;
_head->_prev = _head;
/*const_iterator it = lt.begin();
while (it != end())
{
push_back(*it);
++it;
}*/
for (auto e : lt)
{
push_back(e);
}
}
/*list<T>& operator=(const list<T>& lt)
{
if (*this != <)
{
clear();
for (auto& e : lt)
{
push_back(e);
}
}
return *this;
}*/
list<T>& operator=(list<T> lt)
{
swap(_head, lt._head); //交换指针指向的方向,即哨兵
return *this;
}
~list()
{
clear(); //清楚除哨兵外的数据
delete _head;
_head = nullptr;
}
void clear()
{
iterator it = begin();
while (it != end())
{
erase(it++); //迭代器失效是因为,it被销毁后访问++或*,先调用重载++,后erase
}
}
void push_back(const T& x)
{
//Node* tail = _head->_prev;
//Node* newnode = new Node(x); //括号这里讲过
//
//tail->_next = newnode;
//newnode->_prev = tail;
//newnode->_next = _head;
//_head->_prev = newnode;
insert(end(), x); //插在哨兵前,哨兵前就是尾
}
void pop_back()
{
//erase(iterator(_head->_prev));
erase(--end()); //哨兵前就是最后一个数据
}
void push_front(const T& x)
{
insert(begin(), x);
}
void pop_front()
{
erase(begin());
}
void insert(iterator pos, const T& x) //pos位置前插入
{
Node* newnode = new Node(x); //这里一定要初始值x
Node* cur = pos._node;
Node* prev = cur->_prev;
cur->_prev = newnode;
newnode->_next = cur; //1 2 3 3 4
newnode->_prev = prev;
prev->_next = newnode;
}
void erase(iterator pos)
{
assert(pos != end()); //不能删哨兵 1 2 3 3 4
Node* cur = pos._node;
Node* next = cur->_next;
Node* prev = cur->_prev;
delete cur; //可以不置空,出作用域自动销毁
next->_prev = prev;
prev->_next = next;
}
private:
Node* _head;
};
void test_list1() //基本的遍历
{
list<int> lt;
lt.push_back(1);
lt.push_back(2);
lt.push_back(3);
lt.push_back(4);
list<int>::iterator lit = lt.begin();
while (lit != lt.end())
{
cout << *lit << " ";
++lit;
}
cout << endl;
}
struct Date
{
int _year = 0;
int _month = 1;
int _day = 1;
};
void test_list2() //cout类的数据
{
list<Date> dlt;
dlt.push_back(Date());
dlt.push_back(Date());
list<Date>::iterator dit = dlt.begin();
while (dit != dlt.end())
{
//cout << *dit << " "; //此时无法输出,一个类解引用怎么得不出想要的结果
cout << dit->_year << "-" << dit->_month << "-" << dit->_day << endl; //这里->需要重载
// dit-> 返回 Date*
//所以实际上应写为 dit->->_year 为了可读性,编译器将其优化了,这样写反而会出错
cout <<(*dit)._year << "-" << (*dit)._month << "-" << (*dit)._day << endl; //这样写也可以
//但是推荐->写法
dit++;
}
cout << endl;
}
void print_list(const list<int>& lt)
{
list<int>::const_iterator lit = lt.begin();
while (lit != lt.end())
{
//*lit = 1; //在修饰了lt为const,这一步却不报错且可以执行,不符合我们的要求
//此时加入const_iterator begin,end,重载*和&的修改
cout << *lit << " ";
++lit;
}
cout << endl;
}
void test_list3() //测试部分操作接口
{
list<int> lt;
lt.push_back(1);
lt.push_back(2);
lt.push_back(3);
lt.push_back(4);
print_list(lt);
lt.pop_back();
lt.pop_front();
print_list(lt);
lt.clear();
print_list(lt);
}
void test_list4() //测试默认函数
{
list<int> lt1;
lt1.push_back(1);
lt1.push_back(2);
lt1.push_back(3);
lt1.push_back(4);
list<int> lt2(lt1); //之所以在重载++地方报错是因为,clear时调用++,浅拷贝释放后无法++
list<int> lt3;
lt3 = lt2;
print_list(lt2);
print_list(lt3);
}
//Node* cur 和 iterator it 的区别
//他们都指向同一个节点,在物理内存中他们都是存的这个节点的地址
//但是他们类型不一样,他们的意义就不一样了
//*cur表示的是指针的解引用 ,取到的值是节点
//*it 表示去调用这个迭代器重载的*,返回的是节点中的值
}